Post by Big Joe on Feb 6, 2014 12:52:16 GMT -5
Ok I started working on building the 264RLB ™ way before the master site croaked. When I finally got the barrel and most other pieces gathered I emailed Greg - no answer, wait and email again -- still nada. I emailed Sam and got a little ways. but now he is retired and im not sure of where that leaves me. Here is my rub, I can built a 264RLB ™ but, it won't be a real one... in my eyes the real one has the radius shoulder/neck area. Yeah I know what I am. I will not join Facebook - have reasons other than I just don't want to. Would be a complete thread on that. So anyway I sent Sam a fresh email not long ago and am awaiting answer now. last time we talked I dint know what profile I wanted on barrel, I like big barrels always have, so I am looking at maybe a Savage varmint profile now. It's going to built on a savage M12 pre-accu anywho, I have some in sporter and they are fine. I guess my early times headed me that way, used full sized rifle all my life and then Mil gave me a M14 to learn on, then took it away and shoved an M16 in my mitts... a damn toy cap gun is what it felt like. Anyway to now... I managed to copy all the load data on it the guys posted and I have that saved. I did lose all the little things i had stored as links so that sux. I have amassed almost everything one needs to actually start, have brass that needs fire formed even have a mold for 6.5/.264 for if times get really lean. So I am opening this can of worms back up.. either cuss me or join me doesn't matter.